PRODUCT LIST
Clarifiers
Filter Presses
Treatment Systems
Water Purification Systems
RECONDITIONED EQUIPMENT
Treatment Systems
Clarifiers
Filter Presses
Sludge Dryers
Sand Filters
Storage Tanks
Miscellaneous
AUXILIARY EQUPMENT
Tanks
Pumps & Mixers
Oil / Water Separators
Instrumentation
Air Hammer
Flow Restrictors
Replacement Parts
FLOW RESTRICTOR ORDERS
HOME
PRODUCTS
RECONDITIONED
AUXILIARY
TREATMENT SYSTEMS
LAB
CONTACT
Water & Wastewater Equipment Company- Flow Restrictors
Flow Restrictors
TRIKLER
In these times when all of use are looking at expensive wastewater treatment systems, the use of TRIKLER in your plant can save you thousands of dollars in capital equipment costs. The installation of TRIKLER on the inlet to your rinse tanks will give you a constant regulated flow of water regardless of the inlet between 30 and 125 PSI. Capital equipment costs for wastewater treatment systems are often as much as $2.00 per gallon per day (gpd). For instance, a 50,000 gpd system can cost $100,000. Installation of the TRIKLER only has to save you 1.5 gpd in order to pay for itself. On a 200 gallon rinse tank you can usually save this much per minute. Where else can you buy a piece of hardware that is paid for in one minute? We suggest that you buy one or more of our TRIKLER STARTER KITS to get going. The kit consists of all six sizes; 0.25, 0.5, 1.0, 2.0, 3.0, and 4.0 gpm. With these six sizes you can find out what the proper flow should be in each tank in order to assure good quality, then order as many as you need plus a few spares. If larger flows are required, you can run two or more in parallel. TRIKLER is made of ABS and VINYL plastics and is therefore compatible with strong acids or caustic solutions.
TRIKL/AIR
TRIKL/AIR is a Flow Restrictor that also acts as an aerator. Aeration of rinse tanks will usually increase the efficiency of rinsing, permitting you to use less water. LESS WATER = LESS WASTEWATER = MORE PROFIT! The bubbling action will create agitation and circulation in the rinse tank. TRIKL/AIR acts as a vacuum breaker in the water line and will prevent accidental siphoning of hazardous chemicals into the drinking water system. TRIKL/AIR should be mounted no more than 6" above the liquid in the rinse tank to achieve maximum performance. A 1/2" PVC pipe with 1/16" diameter holes every 2" can be used for the sparger across the bottom of the tank. Usually 6 to 12 holes are sufficient. Order Form info@wwe-co.comCopyright 2005 Water & Wastewater Equipment Company, Inc. All rights Reserved.
Flow Restrictors Order Form
IMMEDIATE SHIPMENT FOR INSTOCK ITEMS
Accepting Mastercard and Visa.